Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
B
FEATURES
1.
ON/OFF switch
2.
Charging socket
3.
Receiving windows (4 x)
4.
LED display
5.
Fixing magnets
6.
Charging indicator LED
7 .
Cover of the charging socket
8.
Socket for connection cable to the FRP 707
or for the 12/24V battery cable
9.
Socket for connection cable to the FMR 706
10. LED display
11.
Bracket
12. Clamp screw
13. Socket for 12/24V battery cable
14. Connection cable
C
OPERATION
RECHARGEABLE BATTERY AND CHARGER
The FMR 706 comes with a built-in 7 ,2 V NiMh rechargeable battery pack.
If the red LEDs are flashing from the centre to outwards the battery needs to be charged. If it is not
charged the FMR 706 powers off automatically.
CHARGING THE BATTERIES
Remove the cover no. 7 , connect the charger with the socket no. 2 and the power supply.
Recommended charging time: 15 hrs.
12/24V BATTERY CABLE
Connect the battery cable with the socket no. 8 (or if the FMR 706 is connected to FRP 707 with socket
no.13). Then fix the clamps to the car battery:
RED
to the positive pole (+) at the battery
BLACK
to the negative pole (-) or to the ground (engine block)
10
Receiver
FMR 706
FMR 706 + FRP 707 = SET FMR 700
14
Remote display
FRP 707
Publicité
Table des Matières
