Preparing The Robot - Amibot Swip AS70 Manuel De L'utilisateur

EN
Operating the robot

Preparing the robot

Preparing the clean water tank
Press the tank release button. The front and rear parts of the robot
detach from each other.
Ensure you keep the rear part
of the robot where the clean
water and used water tank unit
is located. Open the clean water
tank's cap and pour in clean
water with some floor cleaner.
NOTES:
• The clean water tank has a maximum capacity of 850 ml and the used water
tank has a maximum capacity of 900 ml.
• For optimum cleaning, check the dilution ratio indicated on the detergent
bottle.
• Only use floor cleaner. Prolonged use of any other product, such as white
vinegar or bleach, could damage the water tank.
• Please fill the tank to the minimum limit indicated on the tank.
10