Amibot Swip AS70 Manuel De L'utilisateur page 22

EN
Troubleshooting
The robot has stopped
vacuuming water while it is
operating.
To avoid breakdowns/malfunctioning, regularly check and clean the
appliance accessories.
Please contact AMIBOT technical department in the following cases:
• If the appliance has been dropped, damaged or come into contact
with water or another liquid (except the two water tanks).
• If the power cable is damaged.
• If the battery is defective.
If none of the above-mentioned steps provide a solution for your
problem, please contact the AMIBOT after-sales department.
•
No indicator
light.
•
20
Check that the main brush
and squeegee are attached
to the robot correctly.
Check the air filter and
clean it.