CAME ZG2 Mode D'emploi page 7

Adjustments
Trimmer T.C.A. = Automatic closing time: 5" to 90".
Trimmer T.P. = Pre-fl ashing time: 0" to 5".
Connections for 2 combined motors
Motor A terminal block Motore B terminal block
2-3 2-4 2-7 1-2 2-C
Connect as per normal use to terminals A and B, but with the control devices connected to terminal A only; then connect to the
terminals as shown in the fi gure.
7
The data and information provided in this manual are to be considered susceptible to change at any time without warning, by CAME cancelli automatici s.p.a.