Luminance Brands Kathy Ireland Home ARLO INDOOR Manuel Du Propriétaire page 8

3. Ceiling Fan Assembly
3.8
Slide the Clevis Pin through the Motor Coupler holes .
Install the Hairpin Clip through the Clevis Pin Holes to
secure (Figure 8) .
NOTE: The Clevis Pin must go through the holes in
the Motor Coupler. It is critical that the Clevis Pin is
properly installed and secure.
WARNING
!
It is critical that the clevis pin and hairpin clip in the
motor coupler are properly installed and secured.
Failure to verify that the pin is properly installed could
result in the fan falling.
3.9
Retighten the two Phillips Head Set Screws evenly to
secure the Downrod to the Motor Coupler in a vertical
position (Figure 9) .
WARNING
!
It is critical that the set screws in the motor coupler are
securely tightened. Failure to verify that the set screws
are properly installed could result in the fan falling.
(Continued)
CLEVIS PIN
MOTOR
COUPLER
Figure 8
RETIGHTEN TWO
PHILLIPS HEAD
SET SCREWS
Figure 9
8
HAIRPIN
CLIP
CLEVIS
PIN
HAIRPIN
CLIP
MOTOR
COUPLER
ETL Model No.: CF345 & CF355