Luminance Brands Kathy Ireland Home ARLO INDOOR Manuel Du Propriétaire page 17

5. How to Wire Your Ceiling Fan
5.10
After Connections have been made, turn Wires and
Connectors upward and carefully push them into the
Outlet Box (Figure 26) .
Position the Antenna Wire on top of the Receiver . Slide
the Receiver completely onto the Hanger Ball, nestled
in the Hanger Bracket (Figure 26) .
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
5.11
Wiring Schematic for reference (Figure 27) .
BLACK (HOT)
TO
120-VOLT
SUPPLY
WHITE
SUPPLY
GROUND
TWO-CONDUCTOR CABLE
GREEN WIRE (GROUND) FROM
GREEN WIRE (GROUND) FROM
Figure 27
STANDARD WALL
CONTROL
GND
(WITH GROUND)
HANGER BRACKET
WHITE
HANGER BALL
OUTLET BOX
ANTENNA
WIRE
RECEIVER
Figure 26
ANTENNA
BLACK
BLACK
WHITE
WHITE
GREEN/YELLOW
GROUND
WHITE
RED
BLUE
GREY
HANGER BALL
HANGER BRACKET
17
(Continued)
RECEIVER
RED
BLUE
GREY
YELLOW
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF345 & CF355