cecotec ENERGYSILENCE 12000 AIR CLIMA CONNECTED Manuel D'instructions page 45

ENGLISH
3.Tap on on the "Log in" button.
4.Tap on on "Create family".
5. Create a name for the family.
6. Set the location.
7.Choose default rooms or add new rooms.
8.Tap on on "Done" and "Completed".
Forgot the password
In case you forgot your password, you can login following these steps:
(Only for accounts with phone number)
1.Tap on on "verify SMS and sign in".
2. Enter your phone number and tap on on "Obtain verification code".
3. Enter the verification code received in your phone.
Or you can reset the password as below:
1. Tap on on "Forgot password".
2. Enter your phone or e-mail account and tap on on "Obtain verification code".
3. Enter the verification code received on your phone or e-mail.
4. Set the new password and tap on on "Done".
6. Add device
There are 2 methods for adding a device: CF (Quick connection) and AP (Access Point).
CF mode
1. Power is displayed on the indoor unit, so there is no need to start the air conditioner.
2. Tap on "+" in the upper right corner of the "Home" screen or tap on on "Add device" in a room
where there is no device connected.
3. Tap on the "Split Air conditioner" logo.
4. Reset the Wi-Fi module by tapping on "DISPLAY" on the remote controller 6 times or use a
suitable tool to press the reset button on the Wi-Fi module, until it shows "CF" on the indoor
display, then tap on on "Next Step".
5. Introduce your Wi-Fi password and tap on on "Confirm"(You can change the network if
needed).
6. You can now see the percentage rate of the connecting process, seeing at the same time
PP","SA","AP" on the indoor display.
"PP" means "Searching the router"
"SA" means "Connected to the router"
"AP" means "Connected to the server"
AP mode
1. Power is displayed on the indoor unit, so there is no need to start the air conditioner.
86 ENERGYSILENCE 12000 AIR CLIMA CONNECTED
2. Tap on "+" in the upper right corner of the "Home" screen or tap on "Add device" in a room
where there is no device connected.
3. Tap on the "Split Air conditioner" logo.
4. Reset the Wi-Fi module by tapping on "DISPLAY" on the remote controller 6 times or use a
suitable tool to press the reset button on the Wi-Fi module, until it shows "AP" on the indoor
display, then tap on "Next Step".
5. Introduce your Wi-Fi password and tap on on "Confirm" (You can change the network if
needed).
6. In the network setting screen, select "SmartLife-****", and tap on the arrow pointing to the
left.
7. You can see the percent rate of connecting process, at the same time "PP","SA","AP".
"PP" means "Searching the router"
"SA" means "connected to the router"
"AP" means "connected to the server"
Air conditioner control
The device's control screen will pop up automatically after adding the device.
The device's control screen will also pop up by tapping on the device's name in the home
screen.
There are two ways of managing the device singing into Wi-Fi:
1º display
Main control interface:
1. Back to home screen
2. Temperature indicator
3. Decreasing the setting temperature
4. Device details and management
5. Turning on/off the air conditioner
6. Selected Mode/Fan speed/ Functions indicator
7. Increasing the setting temperature
Mode setting
1.Tap on Mode to open the Mode screen.
2. Select one of the modes among Feel/Cool/Heat/Dry/Fan.
3.Tap anywhere around the set temperature to cancel the Mode setting.
Setting fan speed
1.Tap on Fan to open the Fan screen.
2.Select one of the fan speeds among High/med/Low/Auto.
3.Tap anywhere around the set temperature to cancel the selection.
ENGLISH
ENERGYSILENCE 12000 AIR CLIMA CONNECTED 87