Tristar PURESTAR Manuel De L'utilisateur page 7

Système de chauffage portatif avec technologie activestar
Masquer les pouces Voir aussi pour PURESTAR:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATING INSTRUCTIONS
Start and select working mode
Setting room temperature
Turn the heater on by pressing the Power button on the control
panel or by pressing the Power button on the supplied remote
control. The Heating Up light will glow until the fan has reached
the set speed.
Select the size of room you will be heating to control the power
output and conserve energy. Press Low to use in a room up to
300 sq ft, Medium to use in a room 300-600 sq ft or High for a
room 600-1000 sq ft.
Press Fan button either on the control panel or remote control to
select fan speed. Choose either Normal speed or High speed.
Use Normal speed for typical, consistent use. Use High speed
to diffuse heat at an increased speed.
Adjust the thermostat by pressing the arrows on the control
panel or remote control.
Once you have chosen the desired temperature, the heater
will remain on until the room temperature increases to the set
temperature. The heater will cycle on and off to maintain the
desired room temperature.
7

Publicité

Table des Matières
loading

Table des Matières