MSI RX480 Neo2 Mode D'emploi page 16

MS-7151 ATX Mainboard
1
ATX 24-Pin Power Connector: JPWR1 This connector allows you to
connectto an ATX power suply.
2 ATX 12V Power Connector: JPWR2, JPWR3 This power connector is
provided to connect 12V power suply.
Floppy Disk Drive Connector: FDD1 This mainboard provides a stand-
3
ard floppy disk drive connector that supports 360K, 720K, 1.2M, 1.44M and
2.88M floppy disk types.
4
Fan Power Connecors: CPU_FAN, NB_FAN, SYS_FAN These fan
connectors support system cooling fan with +12V.
ATA 133 Hard Disk Connectors: IDE1 & IDE2 This mainboard has a 32-
5
bit Enhanced PCI IDE and Ultra DMA 66/100/133 controller that provides PIO
mode 0~4, Bus Master and Ultra DMA 66/100/133 function.
6 Serial ATA/ Serial ATA Connectors controlled by ATI SB400: SATA1 /
SATA2 / SATA3 / SATA4 The chipset of this mainboard is SB400 which
supports four serial ATA connectors SATA1~SATA4. SATA1~SATA4 are
high-speed Serial ATA interface ports. Each supports serial ATA data rate
of 150 MB/s.
7
Chassis Intrusion Switch Connector: JCI1 This connector is con-
nected to a 2-pin chassis switch. If the chassis is opened, the switch will
be short.
8
CD-In Connector: JCD1 The connector is for CD-ROM audio connector.
9 Front Panel Audio Connector: JAUD1 This front panel audio connector
allows you to connect to the front panel audio.
10
Serial Port Header: JCOM 1 (Optional) The mainboard offers one 9-pin
header as serial port to attach a serial mouse or other serial devices.
Front Panel Connectors: JFP1, JFP2 The mainboard provides one front
11
panel connector for electrical connection to the front panel switches and
LEDs.
Power
LED
2
1
Reset
HDD
Switch
LED
E-8
Power
Switch
10
JFP1
9
Speaker
2 8
JFP2
1 7
Power LED