MSI RX480 Neo2 Mode D'emploi page 28

MS-7151 ATX Mainboard
H/W Monitor
This section shows the status of your CPU, fan, overall system status, etc. Monitor
function is available only if there is hardware monitoring mechanism
CPU Shutdown Temperature
If the CPU temperature reaches the limit preset in the next setting, the system will
shutdown automatically. This helps you to prevent the CPU overheating problem.
This item is available only when your OS supports this function, such as W indows
O O O
C C C
ME/XP. Setting options: [Disabled], [75 ]. [80 ], [85 ].
CPU Fan Failure Warning
W hen enabled, the system will automatically monitor the CPU fan during boot-up. If it
detects that the CPU fan is not rotating, the system will show an error message on
the screen and halt the boot-up process. The function is built with CPU fan power
connector (CPU_FAN) only and enables you to protect the CPU from possible
overheating problem. If you don't connect the CPU fan to the CPU fan power connector,
we recommend disabling this feature. Setting options: [Enabled], [Disabled].
Chassis Intrusion
The field enables or disables the feature of recording the chassis intrusion status
and issuing a warning message if the chassis is once opened. This item is
available only when your mainboard has JCI1 jumper. To clear the warning
message, set the field to [Reset]. The setting of the field will automatically return to
[Enabled] later. Settings: [Enabled], [Reset], [Disabled].
Smart Fan
W hen the current temperature of the CPU fan reaches the value you specify here,
the CPU fan will speed up for cooling down to avoid the CPU damage; on the contrary,
if the CPU fan current temperature is lower than the specified value, the CPU fan will
slow down its speed to keep the temperature stable.
E-20