MSI RX480 Neo2 Mode D'emploi page 23

Power on the computer and the system will start POST (Power On Self Test)
process. W hen the message below appears on the screen, press <DEL> key to
enter Setup.
If the message disappears before you respond and you still wish to enter
Setup, restart the system by turning it OFF and On or pressing the RESET button.
You may also restart the system by simultaneously pressing <Ctrl>, <Alt>, and
<Delete> keys.
Control Keys
< ↑ >
< ↓ >
< ← >
< → >
<Enter>
<Esc>
<+/PU>
<-/PD>
<F1>
<F5>
<F6>
<F7>
<F10>
Getting Help
After entering the Setup menu, the first menu you will see is the Main Menu.
M ain M enu
The main menu lists the setup functions you can make changes to. You can
use the control keys ( ↑↓ ) to select the item. The on-line description of the highlighted
setup function is displayed at the bottom of the screen.
Sub-M enu
If you find a right pointer symbol (as shown in the
right view) appears to the left of certain fields that means
a sub-menu containing additional options can be launched
from this field. You can use control keys ( ↑↓ ) to
highlight the field and press <Enter> to call up the sub-
menu. Then you can use the control keys to enter val-
ues and move from field to field within a sub-menu. If you want to return to the main
menu, just press <Esc >.
General Help <F1>
The BIOS setup program provides a General Help screen. You can call up this
screen from any menu by simply pressing <F1>. The Help screen lists the appropriate
keys to use and the possible selections for the highlighted item. Press <Esc> to exit
the Help screen.
BIOS Setup
Press DEL to enter SET UP
Move to the previous item
Move to the next item
Move to the item in the left hand
Move to the item in the right hand
Select the item
Jumps to the Exit menu or returns to the main menu from a submenu
Increase the numeric value or make changes
Decrease the numeric value or make changes
General help, only for Status Page Setup Menu and Option Page
Setup Menu
Restore the previous CMOS value from CMOS, only for Option Page
Setup Menu
Load the default CMOS value from Fail-Safe default table, only for
Option Page Setup Menu
Load Optimized defaults
Save all the CMOS changes and exit
User's Manual
E-15