Dimensions and Cabinet Requirements
General Cabinet Requirements
¼" (6.4 mm) space between the side of the appliance
▯
and an adjacent wall or cabinet door when installed at
the end of a cabinet run.
The cabinet base must be flat and capable of
▯
supporting the weight of your appliance when in use.
See section Cabinet Dimensions.
The appliance door will overlap the furniture below by
▯
approx. 3/16" (5 mm) when opened.
WARNING
9
There must be an air gap of at least
between the appliance and the cabinet walls when
the appliance is installed, i.e.
Outlet Area
The outlet can be located anywhere within the shaded
area. Anywhere within the shaded area, the minimal
distance between the appliance and the wall is 1¾ in
(45 mm).
Appliance Dimensions
6
" (6 mm)
]
" (3 mm) each side.
X
Cabinet Dimensions
NOTICE: The cabinet base must be flat and capable of
supporting a weight of at least 142 lbs (64.1 kg).
Under counter dimensions