Bushnell LYNX 260401 Mode D'emploi page 7

IR BUTTON POWER BUTTON
EYEPIECE
DIOPTER
IR ILLUMINATOR
OBJECTIVE LENS
(MAIN) FOCUS
Using the Infrared Illuminator
Your Night Vision device offers a Built-In Infrared Illuminator. This allows you to see in complete darkness where no ambient
light source, such as moonlight, is available. If the subject is to be viewed in a completely dark area, activate the infrared
illuminator by pressing the IR button. In brighter areas turn off the IR illuminator by pressing it again to maximise battery life.
7