Fein ASCM12 Mode D'emploi page 19

Original Instructions.
en
Symbols, abbreviations and terms used.
Symbol, character
WARNING
3. 4.
Fe
Explanation
Do not touch the rotating parts of the power tool.
Make sure to read the enclosed documents such as the Instruction Manual and the
General Safety Instructions.
Observe the instructions in the text or graphic opposite!
Before commencing this working step, remove the battery from the power tool.
Otherwise there may be danger of injury caused by unintentional starting of the
power tool.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
General prohibition sign. This action is prohibited.
Do not charge damaged batteries.
Keep the battery away from fire. Protect the battery against heat, e. g. against con-
tinuous intense sunlight.
Observe the information in the adjacent text!
Additional information.
Gripping surface
Switching on
Switching off
Confirms the conformity of the power tool with the directives of the European
Community.
This symbol confirms the certification of this product for the USA and Canada.
This sign indicates a possible dangerous situation that could cause severe or fatal
injury.
Recycling symbol: designates recyclable materials
Worn out power tools and other electrotechnical and electrical products should be
sorted separately for environmental-friendly recycling.
Battery type
1. gear/2. gear/3. gear/4. gear
Drilling diameter, steel
Drilling diameter, wood
Drilling diameter, stone
en
19