Fein AGWP 10 Mode D'emploi page 16

OBJ_BUCH-0000000253-001.book Page 16 Tuesday, February 16, 2016 2:53 PM
en
16
en Original Instructions.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Observe the information in the adjacent text!
General prohibition sign. This action is prohibited.
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this working step, remove the battery from the power tool. Otherwise
there may be danger of injury caused by unintentional starting of the power tool.
Use eye protection during operation.
Use ear protection during operation.
Do not charge damaged batteries.
Keep the battery away from fire. Protect the battery against heat, e. g. against continuous
intense sunlight.
Gripping surface
Additional information.
Confirms the conformity of the power tool with the directives of the European Community.
This symbol confirms the certification of this product for the USA and Canada.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
Recycling symbol: designates recyclable materials
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
Battery type
Low speed
High speed
(**) may contain numbers and letters