Télécharger Imprimer la page

LaserLiner CondenseSpot Pro Mode D'emploi page 11

Masquer les pouces Voir aussi pour CondenseSpot Pro:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations and limits in accordance
with the EMC Directive 2014/30/EU which is covered by the Radio Equipment Directive 2014/53/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity
of people with pacemakers – may apply. Electronic devices can potentially cause hazards or interference
or be subject to hazards or interference.
– The measuring accuracy may be affected when working close to high voltages or high electromagnetic
alternating fields.
Safety instructions
Dealing with RF radiation
– The measuring device is equipped with a wireless interface.
– The measuring device complies with electromagnetic compatibility and wireless radiation regulations
and limits in accordance with the RED 2014/53/EU.
– Umarex GmbH & CO. KG hereby declares that the CondenseSpot Pro radio equipment meets the
requirements and other specifications of the European Radio Equipment Directive 2014/53/EU (RED).
The EU Declaration of Conformity can be found in its entirety at the following address:
http://laserliner.com/info?an=AJH
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents.
Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.
Calibration
The measuring device must be calibrated and tested on a regular basis to ensure it is accurate and
working properly. We recommend carrying out calibration once a year. Contact your distributor or
the UMAREX-LASERLINER service department.
1
2
3
CondenseSpot Pro
1
LC display
4
2
Set emissivity factor
3
Alarm function ON/OFF
5
4
Humidity / ambient temperature sensor
5
Infrared sensor
6
6
8-point laser circle outlet
7
Switch between ambient/dew point
7
temperature / MIN/MAX temperature
8
8
ON / trigger
9
Battery compartment
10
1/4" tripod threads
9
10
11
EN

Publicité

loading