Personal Protective Equipment; Before Use - Hilti SID 14­A Mode D'emploi

5.2.6 Personal protective equipment

en
The user and any other persons in the vicinity must wear ANSI Z87.1-
approved eye protection, a hard hat, ear protection, protective gloves
and breathing protection while the machine is in use.

6 Before use

6.1 Battery use and care
NOTE
Battery performance drops at low temperatures. Use the tool only after
fully charging the battery. This ensures that maximum battery capacity is
available. Change to a second battery as soon as a drop in performance is
noticed. Recharge the battery immediately so that it is ready for reuse.
Store the battery in a cool, dry place. Never store the battery where it is
exposed to direct sunlight or sources of heat, e.g. on heaters / radiators or
behind a motor vehicle windscreen. Batteries that have reached the end of
their life must be disposed of safely and correctly to avoid environmental
pollution.
14
Printed: 19.09.2013 | Doc-Nr: PUB / 5070694 / 000 / 02