Maintenance; Accessories - Luminance Brands Kathy Ireland Home KEANE Manuel Du Propriétaire

7. Installing the Wall Control
7.3
Screw the Fan Control into Wall Box using the supplied
6-32 x 3/4" Screws (Figure 26) .
Leave the Fan Control in the "OFF" mode until Fan
installation is completed .
Position the Faceplate (supplied) onto the Fan Control .
Using the Two supplied 6-32 x 1/4" Screws, Screw the
Faceplate to the Wall Box (Figure 26) .
Restore Power at the Main Fuse Box or Circuit Breaker
Panel .
IMPORTANT CARE INSTRUCTIONS
for your Ceiling Fan
Periodic cleaning of your new Ceiling Fan is the only
maintenance that is needed .
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish .
Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish .
S e e y o u r l o c a l L u m i n a n c e B r a n d s d e a l e r ,
www .luminancebrands .com or our catalog for these

accessories:

· Ceiling Fan Controls
· Downrod Extension Kits
WARNING
!
The use of any other control not specifically approved
for this fan could result in fire, shock and personal
injury.
FACEPLATE
Figure 26

8. Maintenance

Do not use water when cleaning your ceiling fan.
It could damage the motor or the blades and create the
possibility of an electrical shock.
9. Accessories
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product
by Luminance Brands. Substitution of parts or
accessories not designated for use with this product
by Luminance Brands could result in personal injury
or property damage.
16
(Continued)
WALL BOX
4-SPEED SLIDE
CEILING FAN
CONTROL
L
M 1
M 2
H
O F
F
6-32 x 3/4" SCREWS (2)
6-32 x 1/4" SCREWS (2)
WARNING
!
WARNING
!
ETL Model No.: CF320