Axis Q16 Serie Mode D'emploi page 20

AXIS Q16 Network Camera Series
10. Place the top cover on the bottom cover and tighten the four screws with 2 N m (1.5
lb ft) tightening torque.
11. Remove the plastic film from the window.
Find the device on the network
To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility
or AXIS Device Manager. Both applications are free and can be downloaded from axis.com/support.
For more information about how to find and assign IP addresses, see the document How to assign
an IP address and access your device on the device page at axis.com.
How to adjust focus and zoom
If the camera is mounted so that you cannot look at the image and access the lens at the same
time, use the Focus Assistant, see How to adjust focus with the Focus Assistant on page 21.
1. Go to the Image tab in the product's webpage.
2. Adjust Zoom.
3. Click Autofocus.
20