Renkforce DVD6311 Notice D'emploi page 84

Programming the playing order
You can programme a playing order of up to 16 titles.
• Press the PROG (32) button on your remote control to activate title programming.
• Select the titles in the desired order using the numeric buttons (34) and type them in on the display under
PROGRAM.
• DVD titles must be typed in under "T", DVD chapters under "C".
• Use the arrow buttons (30) on the remote control to browse.
• To save the title list, select ENTER with the cursor (30) and press the button ENT (6) or ENTER on the remote
control.
• Use the arrow buttons (30) to select CLEAR and press the ENT button (6) or the ENTER button on the remote
control to delete the selected order.

To play the titles in normal order, press the PBC/STOP button (31) or 4/ (21) twice. The previously
programmed order is not deleted.
Setup menu
The setup menu allows you to configure the basic settings of the device.
• Use the arrow buttons (30) on the remote control to browse the menu.
• Press the ENTER button to select a menu item.

To access the setup menu, a DVD has to be inserted.
In this menu you can set the language in which messages are displayed. The following description
refers to English which is the default language of the device.
When you change the language, the wording might be different from the wording described below.
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
84
Sets up the TV system (country specific, normally PAL in Germany)
In the AUTO position, the TV system is automatically set to the playback medium.
Activates/deactivates the screen saver
Adjusts the video format
Adjusts the margins on the screen
Operating Instructions

English