Troubleshooting - Renkforce DVD6311 Notice D'emploi

Syntoniseur dvd
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting

By purchasing the Renkforce DVD6311 DVD Tuner you have acquired a state-of-the-art product which operates
reliably.
Nevertheless, problems or malfunctions may occur.
We would therefore like to describe how you can eliminate possible malfunctions:
Please observe the safety instructions!
No playback, no display, no light:
• The car fuse is defective. Look up the respective fuse in the operating instructions of your car and check it.
The fuse of the device is defective. Remove the device and check the fuse.
The plus line/ground line is loose. Remove the device and check the connections.
Playback on one speaker only:
• Balance control is wrongly adjusted. Adjust balance control as described.
The speaker connection has come loose. Remove the device and/or the speakers and check the connections.
Playback on front or on rear speakers only:
• Fader control is wrongly adjusted. Adjust fader control.
The speaker connection has come loose. Remove the device and/or the speakers and check the connections.
In radio mode hardly any stations can be received:
• The aerial is not fully extended. Pull out the aerial to its full length.
The aerial connection has come loose. Remove the device and check the connection.
The aerial is defective. Check the connection, grounding and the aerial itself.
Playback interferences:
• Interferences get to the device through the plus line. Install an additional noise suppression choke on the plus
line. If necessary also equip the vehicle with spark-plug suppressors, distributor arms etc. to suppress
interferences.
91

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

37 14 78

Table des Matières