Seca 786 Mode D'emploi Et Garantie page 9

Fitting the column
On the seca 786 cultura, the column is already fitted. On the other models, please
proceed as follows:
– turn the column so that the display
faces the weighing surface.
– pass the connecting rod through the
opening and place the column in the
opening.
– Screw the column to the weighing plat-
form from underneath.
Your scale is mobile...
It has two castors at the rear.
– For mobile use, the seca 786/culta/
cultura scale can be tipped back-
wards a little way and then moved on
the castors.
Model seca 786 + culta/cultura
– If necessary, lay the scale carefully on
its side to tighten up the screws.
– Hook the connecting rod over the load
lever tongue.
– Then place the scale upright again.
load lever-
tongue
connecting rod
9
GB