Appendix 1 - Default Parameters - aqua A-TECHNOPOOL 3 SYSTEM pH-RX Manuel De Service Et D'entretien

APPENDIX 1 – Default parameters
14
Language
Set Point pH
pH Work Mode
Proportional Band pH
Set Point Rx
Proportional Band Rx
Relay Mode
Relay On
Relay On at the maximum temperature
Relay Off
Relay Off at the maximum temperature
Maximum Temperature for Relay Timing
Stabilisation Time
Stabilisation after Alarm
Password
User name
Contact assist.
Out 24V Alarm (alarm repetition)
Temperature Mode
Manual Temperature
Offset PT100
Dosing Control (V1)
Flow Control
pH dosing Alarm
Rx dosing Alarm
Buzzer (alarm repetition)
System kind
Pump pH flow
Pump Rx flow
Pump pH Max flow
Pump Rx Max flow
pH Cycle Period
Contrast
Pursuant to directives 2011/65/UE , 2002/96/EC, 2003/108/EC), it is notified that:
The electric and electronic devices must not be considered as household waste.
Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting
points set up for the purpose or point of sale, when purchasing a new equivalent device in terms of one-to-one. The crossed out
rubbish mean symbol on the product, on the instructions manual or on the packaging indicates that the product is subject to the
disposal rules envisioned by the Standard. Illegal disposal of the product implies the application of the administrative fines
provided for by national regulations. By recycling, reusing the material or other forms of utilising old devices, you are making an
important contribution to protecting our environment.
A-TECHNOPOOL 3 SYSTEM pH-RX
Parameter
06/04/2016 Rev.1.5
Default value
English
7,4
Acid
1
650 mV
50 mV
Cyclical
0 s
0 s
0 s
0 s
28 ˚C
30 s
No
"0000"
"
" +390522695805 "
Closed with Alarm
PT100
25 ˚C
0 ˚C
On
Off
Off
Off
Off
Technopool TpH
1.4 l/h
1.4 l/h
4.0 l/h
4.0 l/h
5 min
25
24/100
"