Sd Card Slot; Lcd Display - BST SYMBOL400 Manuel D'utilisation

26.
Power Switch
Press down the button to turn on this unit. The LED will illuminate when the power is on.
27.
AC Connection
This unit comes with a 220V-240V AC power source.
28.
XLR balance output
Connect the mixer to a receiver via cables with XLR plugs
29.
Booth output
Connect the mixer to a second receiver or amplifier powering speakers in the DJ booth or in a remote location
30.
Master Output
Master output to be connected to the main amplifier (DJ final mix after crossfader section). Accepts RCA jacks.
31.
Record output
Connect the mixer to a second receiver or amplifier powering speakers in the DJ booth or in a remote location.
32.
Phono/Line Inputs Sockets
RCA inputs for Channel 1 and Channel 2. Use phono input socket for phonograph turntables. Use line socket
for CD/MP3 players. Line level musical instruments with stereo outputs such as rhythm machines or samplers
should also be connected with the line input socket.
33.
Input Switch
Set this switch based on what is plugged into Phono/ Line input jacks
34.
Mic 1 Socket
Connect your microphone with 1/4" jack plug here.
USB / SD / BLUETOOTH PLAYER OPERATING

1. SD CARD SLOT

Connect on this slot your SD card.
Note : Before you eject the SD card, please set the playback in pause mode or select an other playback support ( USB
or Bluetooth )

2. LCD DISPLAY

The LCD display shows you some information as playback support, file name, elapsed time, total time, file nu-
mber, total file numbers, file system ( MP3 or WMA ) and playback mode ( Repeat one, repeat all, or random. )
Note : In Bluetooth mode, the LCD display shows only the connection status ( connected or disconnected ). All
playback information is on the Bluetooth device.
3. USB SOCKET
Connect on this slot your USB key.
Note : Before you eject the USB key, please set the playback in pause mode or select another playback support
( SD card or Bluetooth ).
4. STOP
Use this button to stop this music.
5. PLAY / PAUSE BUTTON
This button is used to start the playback or to enter in pause mode.
6.|<< PREVIOUS
Use this button to select the previous track.
SYMBOL400 • 5