Front Panel - BST SYMBOL400 Manuel D'utilisation

Front Panel

1.
Mic 1 Socket
Connect your microphone with 1/4" or XLR jack plug here.
2.
MIC Level Control
With this knob, you can adjust the microphone volume.
3.
MIC Treble
Used to increase or lower the microphone's higher frequencies.
4.
MIC Bass
Used to increase or lower the microphone's lower frequencies.
5.
Talkover Button
Press this button if you want to use your microphone. When the button is pressed, all other signal sources will
be attenuated by 14dB, so that the microphone can be clearly heard. In the OFF position, all signals return to
their original level.
6.
Phono/Line/USB Switch
Use this switch to select the input to be sent to the individual channel.
7.
Treble Control
Used to increase or lower the TREBLE of the input channel.
8.
Bass Control
Used to increase or lower the BASSES of the input channel
9.
Channel Fader
Used to adjust the level of each channel.
10.
Crossfader
Mixes the signals of one channel with another. If the crossfader is in the center position. Both channels can
be heard.
11.
ASSIGN
Selects channel 1, 2, 3 or 4 for left or right side of crossfader
12.
Cue Button
Use this button in order to select the channel(s) to be monitored in the headphones.
13.
Headphone CUE/PGM control
Allows you to listen simultaneously or separately to the CUE material or the active program.
SYMBOL400 • 3