Safety Recommendations - BST SYMBOL400 Manuel D'utilisation

2 • SYMBOL400
MAGNETIC FIELD CAUTION! Do not locate sensitive high gain equipment such as preamplifiers or tape decks
directly above or below the unit. This unit has a strong magnetic field which can induce hum into unshielded
devices that are located nearby. The field has strongest spots just above and below the unit. Locate the amplifier
at the bottom of the rack and the preamplifier or other sensitive equipment at the top.
The exclamation point triangle is used to alert the user to important operating or maintenance instructions
The lightning bolt triangle is used to alert the user to the risk of electric shock
• To prevent electric shock, do not remove top or bottom covers.
• No user serviceable parts inside.
• Refer servicing to qualified servicing personnel.
• Disconnect power cord before removing back panel cover to access gain switch.
• No naked flame sources, such as lighted candles, should be placed on the apparatus
• The unit should only be used in moderate climates
• This unit should be cleaned only with a dry cloth. Avoid solvents or other cleaning detergents
• A minimum distance of 0.5m around the unit must be kept to ensure sufficient ventilation and avoid overhea-
ting
• We strongly recommend the use of high-grade cables and connectors for the transmission of audio signals.
Inferior quality materials cannot supply acceptable audio quality or corrosion protection.
WARNING! To reduce the risk of electric shock, do not expose this equipment to rain or moisture!
FEATURES
• 4 channel mixer
• 2 Phono/2 Aux, 4 Line & 1 Mic Inputs
• SD Card Slot and USB port (Reads 16GB Max)
• Separate gain control for each channel
• Balanced XLR and Booth Output
• Booth Output Control
• Master output Control
• Microphone adjustment with Volume, Treble and Bass Control
• Playing USB, SD and BLUETOOTH sources
• 16 -DSP effects with parameter adjustment

SAFETY RECOMMENDATIONS

CAUTION
DO NOT OPEN THE HOUSING
SHOCK HAZARD