Back Panel - BST SYMBOL400 Manuel D'utilisation

4 • SYMBOL400
14.
Headphone level control
Controls the volume level of headphones
15.
Headphone Socket
Connect your headphones with an impedance between 8 and 600 Ohms to this connector.
16.
Master Control
This knob controls the overall output level leaving the Master balanced XLR and unbalanced RCA outputs
17.
Master Level Display
The LED display shows the level of the left and right master output
18.
Booth Control
This knob controls the overall output level leaving the unbalanced Booth RCA outputs
19.
MP3 PLAYER AND BLUETOOTH
See explanation further down
20.
LCD screen
Displays the DSP parameters
21.
TIME
When the TIME function is activated, you can use the jog wheel to adjust the value of the X parameter (time)
of the effect generator.
22.
RADIO
When the RATIO function is activated, you can use the jog wheel to adjust the value of the Y parameter (mix
ratio or resonance or feedback) of the effect generator
23.
BY BASS
Press this button to choose or cancel DJ effects. When you press this button to choose the DJ effects, DJ will
be displayed. When you press this button again to cancel the DJ effects, BYPASS will be displayed.
24.
16 DJ effects selector
You can choose among 16 DJ effects: Flanger, Flanger Verb, Phaser, Robot Flanger, Pitch, Scratch, Analog
Delay, Trans, PhaseWah, Filter, AutoWah, SmallHall, Thinplate, Plate, LPF Reverb, Gated Reveb.
25. JOG WHEEL– This wheel has 2 functions:
In SCRATCH mode
Turn the Effect Selector to N0.6 Effect to activate the scratch function. While in Play mode, you can scratch the
track with the Jog Wheel like a vinyl record
In PARAMETER mode
TIME BUTTON ( X parameter) – When the TIME function is activated, you can use the jog Wheel to adjust the
value of the X parameter (time) of the effect generators.
RATIO BUTTON (Y parameter) –When the RATIO function is activated, you can use the jog Wheel to adjust the
value of the Y parameter (mix ratio or resonance or feedback) of the effect generators.

BACK PANEL