Skil TS6307-00 Guide D'utilisation page 24

Attaching Rip Fence For Use
1. Ensure that the rip-fence lock levers on both sides of the fence are in the released/up
position.
2. Align the notch on the rip-fence bracket with the bolt heads on the front and rear rails
(Fig.20). Ensure that the auxiliary fence will be on the blade-side of the main fence when
in its use position.
3. Press the lock levers down to secure the rip fence in place.
Fig. 20
Rip Fence
Bracket
24
Bolt Head
Notch
Lock Lever