Publicité
1 - PRINCIPLE.
DATA OUT OPTION (ON THE LIGHTING UNIT).
By - pass
Booster
DATA
IN
2 - LINK USE.
CONNECTIONS
To install the DATA line, daisy chain all units.
You can not make a star configuration. In this case - use a specific DATA splitter.
robert juliat
Route de Beaumont F 60530 Fresnoy-en-Thelle - phone: +33 (0)3.44.26.51.89 - fax: +33 (0)3.44.26.90.79 - www.robertjuliat.fr
DOSSIER TECHNIQUE
POURSUITES MSR 2500W
NETWORK USE
DIGITAL
DATA
OUT
Output
Dimmer
a
b
c
d
IN
OUT
(DMX - AVAB)
- The DATA goes to the connector DATA IN on the
CAD 900 ( a ) .
- The signal is present on the DATA output of the
lighting unit.
- When the lighting unit is in use, there are two
possiblities for the output - DATA OUT :
1 : Booster on - The signal passes by an amp.
2 : Booster off - The signal passes on direct on
the output.
( Refer to User's manual CAD 900 - page 11 ).
- When the lighting unit is not in use ( power supply
off ), the DATA is still present on DATA output.
a
b
c
d
IN
OUT
1039 & 1439 /
1039 B / CB
B, C & CB
& 1439 B / CB
Section A - 12
Output
Dimmer
etc.
Publicité
