Bosch GLM 100 C Consignes D'utilisation/De Sécurité page 8

The use of optical instruments with this product will increase eye
hazards.
Have the measuring tool repaired only through qualified specialist
using original spare parts. This ensures that the safety of the measuring
tool is maintained.
Do not allow children to use the measuring tool without supervision.
They could unintentionally blind other persons.
Do not use the laser viewing glasses as safety goggles. The laser
viewing glasses are used for improved visualization of the laser beam, but
they do not protect against laser radiation.
Do not use the laser viewing glasses as sun glasses or in traffic.
The laser viewing glasses do not afford complete UV protection and reduce
color perception.
Safe Operating Procedures
Be sure to read and understand all instructions in this manual
before using this product. Failure to follow all instructions may result
in hazardous radiation exposure, electric shock, fire, and/or bodily injury.
Use of controls or adjustments or performance of procedures
other than those specified in this manual, may result in hazardous
radiation exposure.
The use of optical instruments with this product will increase eye
hazard.
IMPORTANT: The following labels are on your measuring tool for
your convenience and safety. They indicate where the laser light
is emitted by the level. ALWAYS BE AWARE of their location when
using the level.
ALWAYS: Make sure that any bystanders in the vicinity of use are
made aware of the dangers of looking directly into the measuring
tool.
DO NOT remove or deface any warning or caution labels. Removing
labels increases the risk of exposure to laser radiation.
DO NOT stare directly at the laser beam or project the laser beam
directly into the eyes of others. Serious eye injury could result.
-8-