Bosch GLM 100 C Consignes D'utilisation/De Sécurité page 18

D) After calibration at 0 ° and 90 ° with an additional angle error of
±0.01 ° /degree to 45 ° (max.).
E) In the continuous measurement function, the maximum operating
temperature is 104° F (+40 °C).
F) At 77° F (25 °C) operating temperature.
G) For a new and charged battery without display illumination, Bluetooth ®
and tone signal.
Please observe the article number on the product label of your battery
charger. The trade names of individual battery chargers may vary.
Please observe the article number on the product label of your measuring
tool. The trade names of the individual measuring tools may vary.
For clear identification of your measuring tool, see the serial number 20 on
the product label.
Product Features
The numbering of the product features shown refers to the illustration of
the measuring tool on the graphic page.
1 Display
2 Measuring button
3 Button for angle measurement/calibration **
4 Button for clearing the internal memory/On/Off **
5 Minus button
6 Button for result/timer function **
7 Button for measured-value list/storage of constant **
8 Button for function mode/basic settings **
9 Positioning pin
10 Button for selection of the measuring reference.
11 Plus button
12 Button for length, area and volume measurement
13 Bluetooth ® button
14 Micro-USB socket cover
15 Micro-USB socket
-18-