Publicité
Les langues disponibles
Les langues disponibles
After starting the Bosch application on the mobile device, the connection
between the mobile terminal/device and the measuring tool is established.
When several active measuring tools are found, select the appropriate
measuring tool. When only one active measuring tool is found, the
connection is automatically established.
Note: When establishing the connection between the measuring tool and
the mobile terminal/device (e.g., smartphone, tablet) the first time (pairing),
the measuring tool's PIN code may be requested. In this case, enter
"0000".
The connection status and the active connection are indicated on the
display 1 (l).
When a connection cannot be established within 5 minutes after pressing
the Bluetooth ® button 13, the Bluetooth ® feature automatically switches
off to save the batteries.
When operating the measuring tool in the measuring rail 26, data
transmission is not possible.
Deactivating the Bluetooth ® Interface
To deactivate the Bluetooth ® interface, press the Bluetooth ® button 13 or
switch the measuring tool off.
When the Bluetooth ® interface is deactivated or the Bluetooth ®
connection is interrupted (e.g., when the distance between the measuring
tool and smart device is too large), Bluetooth ® (l) is no longer indicated
on the display.
Data Transmission via USB Interface
Connect the measuring tool to your computer or notebook with the micro
USB cable. After starting the software on your computer or notebook, a
connection is established to the measuring tool.
To download the current software and for further information, please refer
to the Bosch website at www.boschtools.com.
Note: As soon as the measuring tool is connected to a computer or
notebook via the micro USB cable, the lithium ion battery begins charging.
The charge duration varies depending on the charging current.
To recharge the measuring tool as quickly as possible, use the provided
charger, see "Battery Charging".
-33-
Publicité
