3.3. CLEANING AND CARE OF THE APPLIANCE
-
The correct operation of the appliance is guaranteed only if these instructions are
followed very carefully.
-
Any repairs or maintenance operations must be performed only by qualified
technicians. We recommend to have the appliance controlled at least once a year; for
this purpose it is advisable to apply for a service contract.
-
Keep the thermocouples constantly clean and treat them carefully.
-
Control the burner gas outlet holes periodically. They must always be kept clean.
Do not use aggressive substances or abrasive detergents when cleaning the stainless
steel components.
Avoid using metal pads of the steel parts as they may cause rust. For the same reason
avoid contact with materials containing iron.
Do not use sandpaper or abrasive paper for cleaning; in special cases use a powder
pumice stone.
In case of particularly resistant dirt, it is advisable to use abrasive sponges (e.g.
Scotch-Brite).
It is advisable to clean the appliance only once it has cooled down.
Warning! : When cleaning the appliance never use direct jets of water to prevent
infiltration of the liquid and damage to components.
Clean the cooking vat with water and a detergent, rinse thoroughly and dry well with a
soft cloth.
External surfaces should be washed down using a sponge, and hot water with a
suitable proprietary cleaner addend.
Rinse always thoroughly and dry with a soft cloth.
Instruction manual for installation, maintenance and use
GAS TILTING BRATT PANS Serie 900 BM.G080-200
3.3.1. DAILY CLEANING
- GB -
22 di 40
Page