Safety And Instruction Decals; Product Description - Maruyama BT23L Manuel Du Propriétaire/De L'utilisateur

8. Use the Trimmer only in daylight or good artificial
light.
9. Never operate the Trimmer without proper guards
or other protective safety devices in place.
10. Always keep the Trimmer on the right side of your
body.
11. Do not raise the cutting head above waist level.

Safety and Instruction Decals

Safety decals and instructions are easily visible to the operator and are located near any area of
potential danger. Replace any decal that is damaged or lost

Product description

BT23L
ON SHAFT (Part No.221501)
ON SHAFT (Part No.221502)
− US-8 −
12. Do not put hands or feet near or under any rotating
parts. Keep clear at all times. Keep all parts of
your body away from the rotating cutting
attachment and hot surfaces such as the muffler.
13. Keep firm footing and balance. Do not overreach.
14. Use the right tool for the job. Do not use the
Trimmer for any job that is not recommended by
1. Gearcase
2. Shaft Assembly
3. Model Name
4. Safety Decal
5. Loop Handle
6. Throttle Trigger and Stop Switch
7. Clutch Drum Housing
8. Engine
9. Serial Number (on rear of engine)
10. Air Filter
11. Fuel Tank
12. Throttle Cable and Stop Switch
13. Debris Shield
14. Trimmer Head
]
9
Wires