GALAGAR Gala mig 3000 Manuel Technique D'instructions page 16

1.2. WIRE-FEED UNITS D-12 A
Open wire-feed units with roll-cover, with industrial characteristics. Drive motors with two and four
intermeshed rollers. Possibility of incorporating an cooling unit.
1.3. EXTENSION CORDS. WELDING TORCHES.
1.4. RECOMMENDED ACCESSORIES.
- Digital measuring kit (GALA MIG 3800); Ref. 439.81.075
- Pressure reducing valve for Argon-CO
- GAS FREE regulator is able to save up to 50% consumption of any protection gas. Ref: 379.00.000
- Prof. electronic shield Ref. 30144000V
FOR THE USE OF ANY OTHER ACCESSORY CONSULT THE MANUFACTURER.
GALA MIG 3000/3800.
Recommended Extension Cords and Welding Torch.
EXTENSION CORDS
RECOMMENDED WELDING TORCH
, EN2 Ref. 376.00.000
2
D-12 A
Cable 35 mm 2 (5 mt)
Ref. 637.00.000
Cable 35 mm 2 (10 mt)
Ref. 637.81.000
2
Cable 50 mm (20 mt)
Ref. 637.82.000
MX 36 Ref. 880036X
16