DETOXIMIX Soup Blender mini Notice D'utilisation page 38

1- Place the glass bottle, WITHOUT ITS CAP, on the motorised base in respecting the
markers. (figure 1)
2- Turn clockwise. (figure 2)
3 - Then place the cap on the bottle by turning it in the direction of the clock hands.
(figure 3)
4 - Then connect the power cord plug to the motor base. (figure 4)
5- Plug the power cord of your machine into an electrical conforming outlet. A long beep
is emitted and your display flashes. (figure 5) Your machine is ready for use.
Once assembled, and before use, follow the cleaning method indicated in part 7.
BOTTLE FILLING
Once the bottle has been screwed tightly onto the engine block (and without its cap)
first place your solid ingredients, respecting the graduation marks on the right-hand side
of the bottle:
- Do not exceed « HOT MAX » for a hot preparation. Also
add a liquid, respecting the « HOT MAX » limit.
- Do not exceed the « COLD MAX » limit for a cold pre-
paration. Also add a liquid within the « COLD MAX » limit.
WARNING WARNING
Do not fill the bottle beyond the limits indicated on the « COLD
MAX » or « HOT MAX » solid/liquid gauge to avoid overfilling and/
or risk of burns.
Remember to cut your fruit and vegetables into small cubes
(1 cm max) in order to optimise the quantity in the bottle.
SCREWING ON THE STOPPER
Once your bottle has been filled with solids and liquids, screw the
cap on tightly.
The stopper comes into contact with the safety lug on the bottle
in order to allow it to be put under tension. Failure to screw it in
properly will prevent your machine from being under tension.
WARNING WARNING
Once the cap is screwed on, a safety lug secures the assem-
bled elements so that the contents of the bottle do not spill onto
the motor. Remember to empty your preparation into a bowl as
soon as the cap is unscrewed, then unscrew the bottle when it
is empty and clean.
36
Vegetal Baby Soup Heat Smoothie
Milk Food Clean
Vegetal Baby Soup Heat Smoothie
Milk Food
Clean