It is equipped with :
-A motor block associated with a 4-sided blade block rotating from 12,000 to 22,000
rotations per minute depending on the programmes.
- A borosilicate glass bottle with a porthole because it is protected by a thermal pro-
tection layer to limit the risk of burns.
- A stopper that comes to a stop on a safety lug located on the bottle.
- A removable power cable with a plug located at the base of the motor and protec-
ted by a silicone cover.
- A small clever maintenance brush for cleaning the cap and blade block.
Through its LED screen and its 3 intuitive buttons, you will be able to :
- Make hot preparations with the « VEGETAL MILK » - « BABY FOOD » - « SOUP » mode.
- Reheat or cook with « HEAT » mode.
- Mixing or cleaning your product with the « SMOOTHIE-CLEAN » mode
A simple and intuitive Soup Blender that also appeals to your imagination so that you
can enjoy your preparations in just a few minutes.
6- Instruction for use
Method of assembly - Functioning & Practical advice
Before connecting your appliance :
Make sure that your power supply is compatible with your product. This indication is
present under the motor block.
Place your product on a flat, horizontal and perfectly stable surface.
METHOD OF ASSEMBLY
• Before use, make sure that the glass bottle is in perfect condition and is correctly po-
sitioned and screwed without its cap on the engine block. Then place the stopper to
secure the assembly.
NOTE THAT IT WILL BE IMPOSSIBLE TO SCREW THE BOTTLE WITH ITS CAP ON THE ENGINE BASE.
THE BOTTLE HAS A SAFETY PIN THAT CONNECTS TO THE ENGINE BASE, WHICH IS ACTIVATED
ONCE THE CAP IS SCREWED ON. THE CAP MUST ONLY BE PUT IN PLACE ONCE THE BOTTLE
IS SCREWED ONTO THE BLADE BLOCK.
1
Vegetal
Baby
Soup Heat
Smoothie
Milk
Food
Clean
2
3
Vegetal
Baby
Soup Heat
Smoothie
Milk
Food
Clean
Vegetal
Baby
Soup Heat
Smoothie
Milk
Food
Clean
35
4
5