Programming Disc Tracks (Not For Picture Cd/Mp3); Osd Language; Screen Saver - Yamaha DVD-S657 Mode D'emploi

Setup Menu
Programming disc tracks (not for
Picture CD/MP3)
You can play the contents of the disc in the
order you want by programming the tracks
to be played. Up to 20 tracks can be
stored.
1 In 'GENERAL SETUP PAGE', press 34 to
highlight [PROGRAM], then press 2 to
select [INPUT MENU].
2 Press ENTER/OK to confirm.
To input your favorite tracks/chapter
3 Use the numeric buttons to enter a valid
track/chapter number.
1 04
2 10
3 11
4 __
5 __
4 Use 1 234 to move the cursor to the
next position.
If the track number is more than ten,
press T to open the next page and
proceed with programming or,
Use 1 234 to highlight [NEXT] on the
program menu, then press ENTER/
OK.
5 Repeat steps 3–4 to input another track/
chapter number.
If you want to remove a track
6 Use 1 234 to move the cursor to the
track you want to remove.
7 Press ENTER/OK to remove this track
from the program menu.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SETUP.
24
6 __
7 __
8 __
9 __
10 __
To start program playback
8 Use 1 234 to highlight [START] on the
program menu, then press ENTER/OK.
Playback will start with the selected
tracks under the programmed
sequence.
To exit program playback
9 Use 1 234 to highlight [EXIT] on the
program menu, then press ENTER/OK.

OSD Language

This menu contains various language
options for display language on the screen.
For details, see page 11.

Screen Saver

This function is used to turn the screen
saver on or off.
1 In 'GENERAL SETUP PAGE', press 34 to
highlight [SCREEN SAVER], then press 2.
ON
Select this if you wish to turn off the TV
screen when disc playback is stopped or
paused for more than 15 minutes.
OFF
Select this to disable the screen saver
function.
2 Press 34 to select a setting, then press
ENTER/OK to confirm your selection.