Soehnle SYSTO MONITOR 100 Mode D'emploi page 46

TROUBLESHOOTING
FEHLER
E 04 is displayed
EN
EExx is displayed.
"Out" is displayed
44
ZU PRÜFEN
A precise measurement
could not be performed.
A "calibration error" oc-
curred. (XX can indicate
a digital signal, e.g. 01,
02 etc.)
Outside of the measure-
ment range
ABHILFE
Relax for a moment and repeat the meas-
urement.
Repeat the measurement. If the problem occurs
again please contact your seller or our customer
service for further assistance.
Relax for a moment. Reposition the cuff and
repeat the measurement. If the problem occurs
again please contact your doctor.