Soehnle SYSTO MONITOR 100 Mode D'emploi page 28

INTRODUCTION
EN
Carefully read these user
instructions and in particular the
safety information prior to using
this device and keep these user
instructions for future use. When
handing the device over to third
parties, please also include these
user instructions. Non-compliance
with these instructions may cause
injuries or damage the device.
26
IMPORTANT
INFORMATION!
PLEASE KEEP!
Symbol for "THE OPERATION GUIDE MUST
BE READ"
Symbol for "COMPLIES WITH MDD 93/42/EEC
REQUIREMENTS"
0123
Symbol for "MANUFACTURER"
Symbol for "SERIAL NUMBER"
SN
Symbol for "DIRECT CURRENT"
Symbol for "MANUFACTURE DATE"
Symbol for "TYPE BF APPLIED PARTS"
Symbol for "ENVIRONMENT PROTECTION -
Electrical waste products should not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authority or
retailer for recycling advice"
Symbol for "Authorised Representative in the
EC REP
European Community
Caution: These notes must be observed to
prevent any damage to the device.