Troubleshooting - Soehnle SYSTO MONITOR 100 Mode D'emploi

FEHLER
Display does not
show, is hardly
visible or slow
is
displayed
E 01 is displayed
E 02 is displayed
E 03 is displayed
ZU PRÜFEN
Batteries are empty
Batteries are not
inserted correctly.
Low battery charge
The cuff is too tight or
too loose.
The blood pressure
monitor displays
movement during the
measurement.
No pulse was detected
during measurement.

TROUBLESHOOTING

ABHILFE
Replace batteries
Insert batteries correctly.
The charge status of the battery is too low;
batteries must be replaced.
Reposition cuff and repeat measurement
Movements may affect the measurement. Relax
for a moment and repeat the measurement.
Remove the clothing from your wrist and repeat
the measurement.
EN
43