Publicité
Les langues disponibles
Les langues disponibles
B) motor open circuit
C) motor idling
A) storage IC not well inserted
E08
B) storage IC broken, or pcb broken
A) machine stand or not put evenly on floor
E09
B) pcb broken
A) pcb torque too big
E10
B) motor short circuit
C) driving position hinder
E11
Input voltage too big
E14
Input voltage too low
A correct lubrication of the treadmill with silicon oil or teflon is REALLY IMPORTANT. This lubrication MUST BE
PERFORMED REGULARLY DEPENDING ON EACH PERSON, EVEN BEFORE ITS FIRST USE.
YOU MUST PRESERVE THE ORIGINAL PACKAGING WITH ITS PROTECTIONS, PURCHASE RECEIPT, MANUAL
AND COMPONENTS DURING THE GUARANTEE PERIOD
IX.WARRANTY
We have one year quality warranty to the frame and engine and 6 month to the wearing
parts. Within the warranty period, we provide the FREE replacement parts. If caused by
incorrect assembly, incorrect use or change of parts failures, our company takes no
responsibility. You should show our products series no. and relative pictures or information
before getting the warranty.
This Treadmill is only for home use, if the problems occurred by commercial used, our
company takes no responsibility.
Change new motor
Re-assemble to test
Re-insert IC, pay attention to pins
Change new IC, or change new pcb
Put evenly on floor
Change new pcb
Adjust torque to right position
Change new motor
Adjust driving position, or add oil
Stop using, ask electrician to check
Stop using, ask electrician to check
Publicité
