sparraw SP RUN104 Manuel D'utilisation page 35

This electronic product must not be disposed of in municipal waste. To preserve the environment, this product
must be recycled after its useful life as required by law.
VIIl.COMMON ERRORS :
ERRO CODE
A) electricity not connected
B) power switch not turn on
C) pcb no power or broken
NO DISPLAY
D) signal wire not connected
E) computer broken
F) background light broken
NOT DISPLAY ALL A) display drive IC not inserted well
B) EMI gasket slip, not well fastened
INFORMATION
A) driving position has resistance
NOT RUN SMOOTHLY
B) running belt too tight or too loose
C) pcb torque too big or too small
---OR---- A) safety key off
B) magnetron not fixed well
(OR E00/E07)
A) signal wire not well connected
B) signal wire broken
E01/E13
C) signal wire broken
D) pcb broken
A) motor wire not well connected, or open
E02
B) IGBT on pcb broken
circuit
C) input voltage too low
A) speed signal wire not well connected, or
E03
B) pcb broken
sensor broken
A) incline motor wire not well connected
E04
B) incline motor broken
C) pcb broken
A) over-loaded
B) driving position hinder
E05
C) motor short circuit
D) pcb burnt
E06 A) motor wire not well connected
REASON HOW TO SOLVE
Connect the electricity
Turn on power switch
Press over-load protector or change new pcb
Re-connect signal wire or change new one
Change new computer
Check background light wire or change new one
Re-insert IC,and re-weld it or change new one
Re-assemble screen
Adjust driving position, or add some silicon oil
Adjust the belt tension
Ajust torque to right position
Put on safety key
Fix magnetron to right position
Re-connect signal wire
Change new signal wire
Change new computer
Change new pcb
Re-connect motor wire or change new motor
Change new pcb
Stop using, ask electrician to check
Re-connect speed signal wire or change new sensor wire
Change new pcb
Re-connect incline motor wire
Change new incline motor
Change new pcb
Turn off and re-start machine
Adjust driving position, or add oil
Change new motor
Change new pcb
Re-connect motor wire