sparraw SP RUN104 Manuel D'utilisation page 25

STEP 1
3. Carry out the machine from the package by two persons and place it lightly on flat floor, and put other
fittings beside the machine. Lift up the stand tube and electronic watch according to the picture(make sure
not to press the signal wire)
4. One person hold the electronic watch steady and the other person puts 4PCS M8*20 and 2PCS M8X45
screw and fix them onto the stand tube with FLAT WASHERS.
STEP 2
Use 2PCS M8*20 screws and FLAT WASHERS to screw up the left and right stand tube with the electronic watch.