Fisher & Paykel OB30 Serie Guide De L'utilisateur page 35

To cancel the SELF CLEAN function before it has finished
Turn the function and temperature knobs to OFF. CLEAN COOL will appear in the function
display and the door will remain locked until CLEAN END appears.
Important!
Do not turn off the mains power supply to the oven. The fans are needed to cool the oven.
Once the oven is cool or below the safe temperature, it will return to normal operation and the clock display
will show the time of day.
Short self-clean cycle
You can select a shorter self-clean cycle if the oven is only lightly soiled:
Select the SELF CLEAN function by turning the function knob.
1
Turn the temperature knob to its maximum position.
2
While is showing, press the
3
colon will flash.
Rotate the
PUSH TO
4
CLEAR
hours.
Press the
COOK TIME
5
clean cycle. The clock display will show the time remaining.
Self-clean – delayed start
You can set your oven to start a self-clean cycle at your convenience:
Check that the clock shows the correct time.
1
Select the SELF CLEAN function by turning the function knob.
2
Turn the temperature knob to its maximum position.
3
While is showing, press the
4
colon will flash.
Set the time that you want the oven to finish by rotating the
5
to wait before the self-clean cycle starts, AUTO and DELAY CLEAN will appear in the clock display.
Important!
The oven door will remain unlocked until the self-clean cycle starts. Ensure that no one places anything in
the oven during this time.
When the self-clean cycle starts, AUTO, DOOR LOCK and CLEAN will appear in the clock display
6
and the time remaining will count down.
COOK TIME
button to reduce the time: this can be anywhere between two and three
button again, or wait eight seconds to adopt the setting and start the self-
STOP TIME
Care and cleaning
will appear in the display.
button. The COOK TIME and AUTO symbols and the
will appear in the display.
button. The STOP TIME and AUTO symbols and the
PUSH TO
CLEAR
33
button. If there is time
US
CA