Oregon PS750-092 Manuel D'instructions Original page 17

FOOTING
Stand with both feet on solid ground, with
weight evenly spread between them.
Hold the pole saw as close as possible to the
body to maintain control (Fig.
FIG. 15
USING THE HARNESS
WARNING: Always attach the harness
when operating the pole saw. Do not carry
it only with your hands.
The harness helps to balance the pole saw and
distribute the weight of the pole saw across the
body, increasing comfort for extended use.
• Remove the nut and screw from the harness
attachment ring (Fig.
FIG. 16
Pole Saw Model PS750-092
Operating the Pole Saw
).
).
• Push the harness attachment ring onto the
pole between handle and grip with the holes
facing upwards. Secure the harness
attachment ring with screw and nut (Fig.
FIG. 17
• Fit and adjust the length of the harness for
easy operation (Fig.
FIG. 18
ADJUSTING THE SHAFT LENGTH
The pole saw features an extendable shaft that
allows greater reach into taller trees.
For ease of use, extend the shaft only as much
as necessary to reach the work safely.
• Unplug the pole saw.
• Turn the extension collar counter clock-wise
( ) until the shaft slides freely (Fig.
• Slide the shaft until it is the desired length ( ).
FIG. 19
(2)
(1)
• Turn the extension collar clockwise to lock the
shaft in place.
).
).
).
17