Funktel FC1 Guide Utilisateur page 53

Mobility Server I 33 / CS I55 • I 1/3/5
Commissioning
Placement of the charger
Place the charger on a solid, even surface, e.g. a table. Choose a location
that is protected from direct sunlight and dampness.
• Plug the plug-in mains unit into a socket.
• Insert the small connecting cord plug into the back of the charging
device. Note: Chargers of type Charger Plus must be operated using
Plug-in mains unit Plus only!
The charger is ready for operation now.
Charging the business handset
Simply place the business handset into
the charger. You will hear an
acknowledgement tone. The display
light will switch on briefly.
The business handset remains
switched on or off, depending on its
status before it was placed in the
charger.
The battery symbol in the symbol row
moves until the battery is completely
charged. When the batteries are being
charged, they will become slightly
warm. This is perfectly normal.
Notes on the rechargeable battery pack
Every time you insert a battery pack into your handset, you must charge
the battery to full capacity for at least 14 hours. Then during the first
week of operation, always return the business handset to the charger
cradle. New batteries will in general reach full capacity only after several
days of normal use.
You can leave your business handset in the charger cradle for extended
periods. The battery cannot be over-charged.
Do not leave the battery in direct sunlight. Proper care of the battery is
rewarded with a long service life.
Charger
53
GB