Dimmer Curve - Cameo CLMPARCOB1 Manuel D'utilisation

OPERATION:
FLOW INVERT
The direction of flows for lighting sequences, in the
METEOR programme for example, can be inverted using
the "FLOW INVERT" function. Press the MODE button
repeatedly until "FLOW INVERT" appears on the display.
Now press ENTER, the cursor appears in the bottom line
of the display. Using the UP and DOWN buttons, select
whether the direction is to be inverted (ON), or not (OFF).
To confirm the input, press ENTER.

DIMMER CURVE

The operating modes "DIMMER CURVE LED" and "DIMMER
CURVE HALOGEN" can be used to determine how the ligh-
ting reacts to sudden, large jumps in DMX dimmer values
in DMX mode (DMX value 000 straight to 255 and the
other way round). In "LED" mode, the lighting immediately
reacts to the change in value, without delay, and in "HALOGEN"
mode it reacts in a manner similar to that of a halogen lamp
with a slight delay (pre-glow and afterglow). Press the MODE
button repeatedly until "DIMMER CURVE" appears on the
display. As soon as you press ENTER, the cursor appears in
the bottom line of the display. Now the desired mode can be
selected using the UP and DOWN buttons. Confirm the input
with ENTER.
13