Publicité
Les langues disponibles
Les langues disponibles
CLEANING THE DUAL BURNER
Pay special attention to this burner: the two holes "H" on the inner fl ame spreader (fi g. 6.8) must always be kept clean.
When cleaning, remove the external fl ame spreader "E" (fi g. 6.3) and use a cotton bud, toothbrush, or some other item to clean out
any incrustations or dirt from the two holes marked "H" (Fig. 6.8). This procedure is necessary to ensure the burner functions correctly.
If the burner does not function correctly and it is not possible to clean out any incrustations or dirt from the two holes, contact
the After-Sales Service.
Fig. 6.5
Fig. 6.8
Fig. 6.7
Fixing screws
Inner
fl ame spreader
Fig. 6.6
H
6
33
33
Publicité
