Using The Display Options; Measured Fill - Fisher & Paykel E522B Instructions D'installation Et Guide De L'utilisateur

Measured Fill

One useful feature of your water dispenser is it's ability to dispense a pre-measured amount of
water. This comes in handy when cooking or preparing drinks.
Press the button to highlight the
preset quantities.
Push the dispensing pad to receive the pre-selected quantity of chilled water. The units will
count up to confirm operation.
If you stop dispensing part way through your pre-selected quantity the dispenser will
remember the remaining quantity to be dispensed for a short time. Simply continue by pressing
the pad.
The and buttons can be used to increase or decrease the pre-set measurements in 1 oz,
(25 ml) increments, to a maximum of 1 qt (1 L).
Changing the Measured Fill units
The pre-set measurements can be displayed in US imperial or metric units.
The unit setting can be changed by pressing the
and pressing the and
Measured Fill option, press the

Using the display options

buttons until the desired units are displayed. To return to the
button.
screen and again to cycle through the
Fig.20 US display
Fig.21 Metric display
button to scroll to the
21
EN
screen